LHD-5.0H is a 5000 kg electric forklift for container devanning and heavy machinery handling. Maximum fork height is 5500 mm with lifting and descent speeds of 310 and 440 mm/s, a turning radius of 2600 mm, a 6/6 degree mast inclination and a 500 mm load centre. Maximum climbing grade is 20 percent at a maximum driving speed of 16 km/h, wheelbase is 2000 mm, and it runs on front 28x12.5-15 and rear 21x8-9 wheels with 140 mm of mast ground clearance. Forks measure 50*150*1070 mm with a 320*1350 mm pitch range, the vehicle is 2975*1496*2427 mm, and total weight is 8300 kg. Battery is 83.2 V at 400 to 720 Ah in lead-acid or lithium iron phosphate, with twin 11.3 kW travel motors. Colour, logo, battery and fittings can be customised.
LHD-5.0H Electric Forklift
LUHONGDA
| Availability: | |
|---|---|
LHD-5.0H is a 5000 kg electric forklift for container devanning and heavy machinery. Fork height reaches 5500 mm, the machine weighs 8300 kg, and twin 11.3 kW travel motors move it on an 83.2 V pack at 16 km/h.
Devanning is done with the forks inside a box, not on an open yard. A 1070 mm fork at a 320*1350 mm pitch range with 5500 mm of height lets the operator reach the far end of a container and lift over a stacked load without reversing out for every pallet.
Machine weight is 8300 kg on 28x12.5-15 front wheels with a 500 mm load centre, which is the counterweight that keeps a 5 ton load attached at height. Machinery and dense cargo do not settle on the forks, so the balance point matters more than the rated figure.
Container floors, dock plates and yard concrete are not forgiving at this weight. A 20 percent climbing grade covers a dock ramp, traction is delivered by twin motors, and 140 mm of mast ground clearance keeps the carriage clear of a plate lip.
Container devanning and loading
Heavy machinery and plant movement
Steel and dense cargo handling
Port and dock transfer
Project cargo preparation
Item | Specification |
|---|---|
Model | LHD-5.0H |
Rated Lifting Weight | 5000 KG |
Max Fork Height | 5500 MM |
Lifting / Descent Speed | 310 / 440 MM/S |
Mast Inclination (Forward / Backward) | 6 / 6° |
Turning Radius | 2600 MM |
Load Centre Distance | 500 MM |
Max Climbing Grade | 20 % |
Wheelbase | 2000 MM |
Front / Rear Wheel | 28x12.5-15 / 21x8-9 |
Mast Ground Clearance | 140 MM |
Fork (T*W*L) | 50*150*1070 MM |
Fork Pitch Range | 320*1350 MM |
Max Driving Speed | 16 KM/H |
Vehicle Size | 2975*1496*2427 MM |
Total Weight | 8300 KG |
Battery Type | Lead-acid / Lithium Iron Phosphate |
Battery Capacity | 400-720 Ah |
Rated Voltage | 83.2 V |
Travel Motor Power | 2x11.3 KW |
Container work is priced on how fast a box is emptied, and heavy machinery on whether the truck stays level. The 5500 mm mast and 1070 mm fork reach into a container, 8300 kg of machine weight holds a 5 ton load, and twin 11.3 kW motors move it at 16 km/h. Paint, forks and manual language are agreed at quotation, and the series is CE certified.
Can it work inside a container? Fork height reaches 5500 mm with a 1070 mm fork and a 320*1350 mm pitch range, which suits devanning and loading work.
How much does the machine weigh? 8300 kg, on a 2000 mm wheelbase with 28x12.5-15 front wheels.
Which battery and motors? An 83.2 V pack at 400 to 720 Ah in lead-acid or lithium iron phosphate, with twin 11.3 kW travel motors.
Send the container type, the load weight and the destination port, and we will confirm configuration and packing.