LHD-MH890 is a 2673 kg skid steer loader with a 894 kg rated working load and 1873 kg of lifting force. The bucket is 1727 mm wide, unloading height is 2301 mm, and maximum operating height reaches 3861 mm. Ground clearance is 186 mm, wheelbase is 1082 mm, wheel tread is 1375 mm, and the radius of gyration is 2048 mm, with travel at 10.5 km/h and a 90 L fuel tank. The Yanmar 4TNV88 water cooled diesel delivers 35.5 kW from 2190 ml with 140.4 Nm of torque. The loader arm and quick attach plate are built for the heavy attachment range, not for a bucket alone, and the frame is 3374 mm long folded. Colour, logo, engine and attachments can be customised.
LHD-MH890 Skid Steer Loader
LUHONGDA
| Availability: | |
|---|---|
LHD-MH890 is a 2673 kg skid steer loader for heavy attachments and demolition support. Rated working load is 894 kg, lifting force is 1873 kg, and the bucket is 1727 mm wide at 2301 mm of unloading height. The Yanmar 4TNV88 diesel delivers 35.5 kW from 2190 ml with 140.4 Nm.
A breaker, a grapple or a set of forks loads the loader arm in a way a bucket never does. At 1873 kg of lifting force the LHD-MH890 holds a heavy attachment at height without bleeding off, and the 894 kg working load is what the machine can carry with margin.
A heavy attachment on a light loader lifts the rear end. At 2673 kg with a 1375 mm wheel tread and a 2048 mm radius of gyration, the machine keeps its stance while the tool is working, which is the difference between a controlled lift and a tip.
Demolition work means reaching over a wall or into a skip. Unloading height is 2301 mm and maximum operating height is 3861 mm, so debris is lifted clear.
Demolition debris clearance
Heavy attachment work with grapple or breaker
Concrete and masonry removal
Bulk material handling from height
Site clearance on constrained footprints
Item | Specification |
|---|---|
Model | LHD-MH890 |
Bucket Width | 1727 MM |
Rated Working Load | 894 KG |
Operating Weight | 2673 KG |
Lifting Force | 1873 KG |
Max Operating Height | 3861 MM |
Unloading Height | 2301 MM |
Radius Of Gyration | 2048 MM |
Ground Clearance | 186 MM |
Wheelbase | 1082 MM |
Wheel Tread | 1375 MM |
Walking Speed | 10.5 KM/H |
Min Folded Size | 3374*1633*2275 MM |
Fuel Tank | 90 L |
Engine Model | Yanmar 4TNV88 |
Engine Type | Water-Cooling / Diesel |
Engine Power | 35.5 KW |
Displacement | 2190 ML |
Twist Moment | 140.4 Nm |
Demolition contractors specify a loader by what it can hold at height, so this machine is sold on lifting force and stance rather than on bucket volume. The Yanmar 4TNV88 is a four cylinder industrial diesel with a service network, and the parts list is issued in the buyer's language. The series is CE certified.
What can it lift at height? Rated working load is 894 kg and lifting force is 1873 kg, so a heavy attachment is held at 2301 mm of unloading height without the rear lifting.
Why 2673 kg for a skid steer? The weight and the 1375 mm wheel tread keep the machine stable when a grapple or breaker loads the arm, which a lighter loader cannot do safely.
Is the machine supplied factory direct? Yes, direct from the factory with paint, decals, manual language and attachments agreed at quotation.
Send the attachment planned, the lift height and the destination port, and we will confirm configuration and packing.