The LHD-TC series is a truck mounted crane that bolts onto a pickup, lorry or flatbed rather than needing its own chassis. Five capacity steps are offered: 1.5 t, 2 t, 3 t, 5 t and 6 t, with boom lengths from 4.8 m up to 9 m and three to six telescopic sections depending on the model. Slewing rings run from 9 inch on the small units to a 800 mm ring with planetary reducer on the 6 t. Winches are matched to the crane: 3 t winch on 1.5 t to 3 t models, 5 t on the 5 t and 6 t on the 6 t. From 3 t upward the crane carries two semi-hydraulic outriggers. A mounting plate with U-bolts fixes the base to the truck frame, and the base width can be built to suit the bed. Power comes from the vehicle 12 V or 24 V system, with 220 V motor, 380 V motor or a single cylinder diesel unit as options.
LHD-TC Series
LUHONGDA
| Availability: | |
|---|---|
The LHD-TC series is a truck mounted crane designed to be bolted onto an existing pickup, lorry or flatbed instead of needing a dedicated chassis. Capacities run from 1.5 t to 6 t with booms from 4.8 m to 9 m, so a dealer can supply one product family across light utility work and heavier lifting on site.
You already own the truck. The crane sits on a mounting plate fixed to the frame with U-bolts, so no second vehicle is needed. Base width is built to suit the truck bed, and the crane can also be fitted to a steel frame or trailer deck.
Shops and yards cannot store a lorry crane. A 3 t unit measures 2200*800*1600 mm and travels in a crate of 2350*1000*1800 mm, so it fits a workshop corner and ships as general cargo rather than a special load.
Power is not always available on site. The standard unit runs from the vehicle 12 V or 24 V supply. Where mains power is available a 220 V or 380 V motor can be fitted, and for remote sites a single cylinder diesel power unit is offered instead.
Utility and municipal pickups carrying poles, pumps and signage; dealer and rental fleets adding lifting capability to existing trucks; farms and yards moving feed, timber and machinery parts; light construction work lifting blocks, frames and formwork onto scaffolds; and trailer or skid mounting where no vehicle bed is available.
Item |
1.5 t |
2 t |
3 t |
5 t |
6 t |
|---|---|---|---|---|---|
Max lifting capacity, boom retracted |
1.5 t |
2 t |
3 t |
5 t |
6 t |
Boom length options |
4.8 m |
4.8 m |
4.8 / 6.8 / 7 / 9 m |
6.8 / 8.5 m |
8.5 m |
Boom sections |
4 sections, 1.5 m each |
4 sections, 1.5 m each |
3 to 6 sections, 1.5 or 3 m each |
4 to 6 sections, 1.5 or 1.8 m each |
4 sections, 1.8 m each |
Winch |
3 t |
3 t |
3 t |
5 t |
6 t |
Slewing ring |
9 inch |
9 inch |
12 to 14 inch |
17 inch |
800 mm with planetary reducer |
Outriggers |
Optional two legs |
Two legs |
Two semi-hydraulic legs |
Two semi-hydraulic legs |
Two semi-hydraulic legs |
Slewing angle |
360 degrees |
360 degrees |
360 degrees |
360 degrees |
360 degrees |
Base width |
650 mm |
650 mm |
650 mm, built to bed width on request |
650 mm, built to bed width on request |
650 mm, built to bed width on request |
Unit size, 3 t reference |
2200*800*1600 mm; crate 2350*1000*1800 mm; 1450 kg including crate |
||||
Power options |
Vehicle 12 V or 24 V; 220 V or 380 V motor; single cylinder diesel power unit |
||||
Control |
Six-way manual valve bank; remote control optional |
||||
Mounting |
U-bolt mounting plate to truck frame, steel frame or trailer deck |
||||
Cranes are assembled and load checked in our own workshop before crating, and each unit ships in a plywood crate sized for container loading. Because the same factory builds the crane, the winch and the outriggers, a dealer can order one capacity step, add a basket or grab, and still receive a single shipment. Colour, label, manual language and power unit are agreed at quotation. Truck mounted cranes in this series are CE certified.
How do I know it will fit my truck? Send the inner width of the bed. The crane base is built narrower than the bed so the unit sits inside the sides, and the mounting plate bolts to the frame. If you mount on a steel frame or trailer there is no bed width limit.
What can it lift at full boom? Capacity falls as the boom extends. The rated capacity applies with the boom retracted; the quotation states the load at each boom length so you can match it to the job.
Can I add a basket or grab? Yes. A 1350*800*1200 mm basket weighing 130 kg, and a 1 m by 1 m telescopic grab, are both offered. The basket stows under the boom when crated.
Which power unit should I choose? Vehicle 12 V or 24 V where the truck runs every day, 220 V or 380 V motor where mains power is at the yard, and diesel where neither is available.
Tell us the truck bed inner width, the load you lift most often and the maximum boom length you need. We will confirm the capacity step, power unit and mounting, then quote with crating and shipping.