English

Products

Home » Products » Truck Crane » Truck Bed Crane for Farm Yard and Dealer Fleet Handling

Product Category

Contact Us

loading

Truck Bed Crane for Farm Yard and Dealer Fleet Handling

This crane is made for the yard, not the highway. It mounts on a flatbed, a trailer deck or a steel frame, so a farm can lift feed sacks, bales, fence posts and machinery parts without buying a dedicated lorry crane. Five capacity steps run from 1.5 t to 6 t with booms from 4.8 m to 9 m, and the winch is matched to the crane so a single operator can lift and place a load. Slewing runs through a full 360 degrees, which matters when the crane sits at the corner of a barn. Power can come from the tractor or truck supply, or from a 220 V motor on the workshop frame. Dealers use the same unit as a stock item because one mounting plate suits many vehicles.

  • LUHONGDA

Availability:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

Product Overview

A truck bed crane for farm and yard work is mounted where the load already is rather than on a new vehicle. It fixes to a flatbed, a trailer deck or a steel frame, lifts bales, feed, posts and parts, and slews through a full circle so the operator can place a load inside a shed or onto a trailer without moving the vehicle. Booms from 4.8 m to 9 m and capacities from 1.5 t to 6 t cover both smallholder use and dealer stock.

Where Manual Handling Costs Money

A two man lift becomes a back injury. Bales, feed sacks and concrete posts are heavy and awkward. The winch takes the weight and the boom places it, so one person can finish the job.

Hiring a lorry crane for a morning is expensive. A yard crane on the trailer or flatbed is there whenever a load needs moving, including weekends and harvest nights.

Shed roofs and silos need occasional lifting. Extending the boom over a wall or into a doorway removes the need for scaffolding on small jobs and avoids dragging equipment outside.

Dealers cannot stock one crane per customer vehicle. One mounting plate suits many beds. Base width is built to the customer bed, so a single stock unit can be supplied across a county.

Applications

Farm yards lifting feed, bales, seed bags and fence posts; machinery dealers loading and unloading implements; small sawmills handling timber lengths; construction yards moving blocks and formwork; and rental fleets adding a lifting option to existing trailers and flatbeds.

Technical Specifications

Item

1.5 t

2 t

3 t

5 t

6 t

Max lifting capacity, boom retracted

1.5 t

2 t

3 t

5 t

6 t

Boom length options

4.8 m

4.8 m

4.8 / 6.8 / 7 / 9 m

6.8 / 8.5 m

8.5 m

Boom sections

4 sections, 1.5 m each

4 sections, 1.5 m each

3 to 6 sections, 1.5 or 3 m each

4 to 6 sections, 1.5 or 1.8 m each

4 sections, 1.8 m each

Winch

3 t

3 t

3 t

5 t

6 t

Slewing ring

9 inch

9 inch

12 to 14 inch

17 inch

800 mm with planetary reducer

Outriggers

Optional two legs

Two legs

Two semi-hydraulic legs

Two semi-hydraulic legs

Two semi-hydraulic legs

Slewing angle

360 degrees

360 degrees

360 degrees

360 degrees

360 degrees

Base width

650 mm

650 mm

650 mm, built to bed width on request

650 mm, built to bed width on request

650 mm, built to bed width on request

Unit size, 3 t reference

2200*800*1600 mm; crate 2350*1000*1800 mm; 1450 kg including crate

Power options

Vehicle 12 V or 24 V; 220 V or 380 V motor; single cylinder diesel power unit

Control

Six-way manual valve bank; remote control optional

Mounting

U-bolt mounting plate to truck frame, steel frame or trailer deck

Why Choose Luhongda

Each crane is assembled, load tested and crated in our own workshop, and the crate size is set for container loading so a dealer can mix cranes with other implements in one container. Spare winches, seals and valve banks are supplied from the same factory, which matters on a farm where a broken seal stops the harvest. Colour, label and manual language are agreed at quotation, and cranes in this range are CE certified.

Buyer Questions

Can it go on a trailer instead of a truck? Yes. The mounting plate bolts to a steel frame, so the crane can sit on a trailer deck, a bale trailer or a static frame in the yard.

Will one operator manage a bale? The winch carries the weight and the boom slews, so one person can lift and place a bale, provided the load is within the rated capacity at that boom length.

What if the tractor has no 12 V supply handy? Run a 220 V motor from the workshop, or fit the single cylinder diesel power unit and work away from any supply.

Can we buy several and mount them ourselves? Yes. Cranes ship crated with the mounting plate and bolts, and the plate pattern is the same across capacities so a dealer can mount on several beds.

Request a Quote

Tell us what the crane will mount on, the heaviest load you handle and how far the boom must reach. We will confirm capacity, power unit and outriggers, then quote with crating for container loading.

Previous: 
Next: 
LHD Machinery is a professional manufacturer and exporter of construction machinery, committed to providing reliable, efficient and cost-effective equipment solutions for global customers.

PRODUCTS

QUICK LINKS

JOIN GLOBAL INSIGHTS

Get latest industry whitepapers and tech updates.
Leave a Message
Contact Us
Copyright © 2026 Shandong Luhongda Machinery Co., Ltd. All Rights Reserved.
Privacy Policy            Sitemap