This crane is built for crews who already run pickups and work trucks and need lifting power without a second vehicle. It mounts on a plate bolted to the truck frame, so a sign crew, a water department or a road maintenance team can lift poles, pumps, light fittings and barriers at the kerb instead of calling a lorry crane. Capacity steps run from 1.5 t to 6 t and boom lengths from 4.8 m to 9 m, with the winch and slewing ring matched to the crane size. Power comes from the vehicle supply, with mains or diesel units available where the truck cannot idle. From 3 t upward the unit carries two semi-hydraulic outriggers, and the base is built to the bed width you specify.
LUHONGDA
| Availability: | |
|---|---|
A truck mounted crane for utility and municipal work fits on the pickup or work truck a crew already drives. The unit bolts to the frame through a mounting plate, lifts poles, pumps, barriers and street furniture, and comes off the road with the truck at the end of the shift. Capacities from 1.5 t to 6 t cover everything from a two man sign crew to a depot that also handles drainage covers and concrete lintels.
A pole on the verge waits a week for a lorry crane. With a crane on the truck, the crew lifts and sets it on the same visit. No hire booking, no second driver, no return trip.
Two people cannot lift a pump out of a chamber. The winch takes the weight while the crew guides it. A 3 t unit handles most municipal pumps, valve covers and light columns.
Depots lose time swapping vehicles. One truck with a crane covers the sign run, the water call out and the barrier job. The crane stays on the frame and comes off only when the truck is sold.
Winter work needs reach, not height. Extending the boom sideways over a kerb keeps the crew out of the carriageway. Slewing through 360 degrees lets them load from either side of the truck.
Street lighting and signage installation; water and drainage call outs lifting pumps, covers and valves; road maintenance moving barriers, cones and temporary plates; parks departments handling benches, bins and play equipment; and depot work loading plant spares onto the same truck that delivers them.
Item | 1.5 t | 2 t | 3 t | 5 t | 6 t |
|---|---|---|---|---|---|
Max lifting capacity, boom retracted | 1.5 t | 2 t | 3 t | 5 t | 6 t |
Boom length options | 4.8 m | 4.8 m | 4.8 / 6.8 / 7 / 9 m | 6.8 / 8.5 m | 8.5 m |
Boom sections | 4 sections, 1.5 m each | 4 sections, 1.5 m each | 3 to 6 sections, 1.5 or 3 m each | 4 to 6 sections, 1.5 or 1.8 m each | 4 sections, 1.8 m each |
Winch | 3 t | 3 t | 3 t | 5 t | 6 t |
Slewing ring | 9 inch | 9 inch | 12 to 14 inch | 17 inch | 800 mm with planetary reducer |
Outriggers | Optional two legs | Two legs | Two semi-hydraulic legs | Two semi-hydraulic legs | Two semi-hydraulic legs |
Slewing angle | 360 degrees | 360 degrees | 360 degrees | 360 degrees | 360 degrees |
Base width | 650 mm | 650 mm | 650 mm, built to bed width on request | 650 mm, built to bed width on request | 650 mm, built to bed width on request |
Unit size, 3 t reference | 2200*800*1600 mm; crate 2350*1000*1800 mm; 1450 kg including crate | ||||
Power options | Vehicle 12 V or 24 V; 220 V or 380 V motor; single cylinder diesel power unit | ||||
Control | Six-way manual valve bank; remote control optional | ||||
Mounting | U-bolt mounting plate to truck frame, steel frame or trailer deck | ||||
Cranes, winches and outriggers are built and load checked in the same workshop, then crated in plywood for container loading. Depot buyers usually start with one unit and add capacity later, so the mounting plate and valve layout stay the same across the range and a second crane drops onto the same truck frame. Colour, label and manual language are set at quotation, and utility and municipal cranes in this range are CE certified.
Will it fit our existing pickups? Send the inner bed width and the frame rail spacing. The base is built narrower than the bed so the unit sits between the sides, and the plate bolts to the rails.
Can one crew operate it? Yes. A six-way valve bank runs the boom, winch and slewing from one position, and remote control is available where the operator needs to stand away from the truck.
What happens in winter when the truck is off the road? The crane can be unbolted and moved to another truck of the same bed width, or run from a 220 V motor on a frame in the depot.
Do you supply the outriggers with it? From 3 t upward the two semi-hydraulic legs are part of the unit. On the smaller sizes legs are optional because the truck springs carry the load.
Send the bed width, the jobs the crew handles most often and whether mains power is available at the depot. We will confirm the capacity step, power unit and outrigger set, then quote with crating.