LHD-08 is an 800 kg mini excavator built for garden work and narrow trenches. Track width is 150 mm and the body is 2430*720*1390 mm, so the machine passes a garden gate and works the path between two long rows of planting beds. Bucket volume is 0.025 m3, maximum digging depth is 1300 mm and maximum digging radius is 2400 mm, with 2350 mm of digging height and 1600 mm of discharge height. Swing angle is 360 degrees, minimum turning radius is 1100 mm, climbing gradient is 30 degrees, and travel is 0-3 km/h. The bulldozer blade digs 150 mm and lifts 260 mm. A Briggs & Stratton petrol engine delivers 14 HP. Colour, logo, engine and attachments can be customised.
LHD-08 Mini Excavator
LUHONGDA
| Availability: | |
|---|---|
LHD-08 is an 800 kg mini excavator for the spaces a ride-on machine cannot enter: a garden path, a trench behind a wall, a planting bed between fences. The body is 2430*720*1390 mm, the bucket holds 0.025 m3, and digging depth is 1300 mm on a full 360 degree swing.
Most garden and courtyard access is decided by a gate opening, not by the digging depth. At 720 mm wide with 150 mm tracks, the LHD-08 goes through where a 1 ton machine stops, and the 1100 mm turning radius lets it swing inside a domestic plot.
At 1300 mm of digging depth and 2400 mm of digging radius, the machine digs a drainage run or a footing trench from one position; the boom reaches without the tracks leaving the path.
The bulldozer blade digs 150 mm and lifts 260 mm, so spoil is backfilled and levelled with the same machine that dug the trench. On a finished garden that saves barrowing and reinstating turf.
Garden and courtyard drainage trenches
Footing and planting hole digging
Cable and irrigation runs along paths
Pond and water feature excavation
Turf and paving reinstatement
Item | Specification |
|---|---|
Model | LHD-08 |
Track Width | 150 MM |
Bucket Volume | 0.025 M3 |
Ground Clearance | 380 MM |
Machine Weight | 800 KG |
Max Digging Height | 2350 MM |
Max Discharge Height | 1600 MM |
Max Digging Depth | 1300 MM |
Max Digging Radius | 2400 MM |
Mini Turning Radius | 1100 MM |
Swing Angle | 360° |
Climbing Gradient | 30° |
Walking Speed | 0-3 KM/H |
Bulldozer Max Depth | 150 MM |
Bulldozer Raising Height | 260 MM |
Product Size | 2430*720*1390 MM |
Engine | Briggs & Stratton |
Rated Power | 14 HP |
A garden machine is bought by landscapers and hire shops that need it to start every morning and fit through the gate every afternoon. The petrol engine is a common Briggs & Stratton unit, tracks and bucket are consumables a dealer can restock, and paint, decals and manual language are set at quotation. The series is CE certified.
Will it fit through a garden gate? The body is 720 mm wide, so it passes a domestic gate opening that stops a 1 ton machine.
How deep does it dig? 1300 mm of digging depth and 2400 mm of digging radius, with a 360 degree swing.
Petrol or diesel? A Briggs & Stratton petrol engine rated 14 HP, which suits sites where petrol is easier to supply than diesel.
Can attachments be supplied? Buckets and attachments, paint, decals and manual language are agreed at quotation. Send the market and the volume.
Send the trench length, the access width and the destination port, and we will confirm configuration and packing.