LHD-17J is a 1.7 ton mini excavator for pipe laying and utility work. Track width is 180 mm and the body measures 2950*1100*2200 mm with 370 mm of ground clearance. Bucket volume is 0.03 m3, maximum digging depth is 1900 mm and digging radius is 2450 mm, with 2750 mm of digging height and 1800 mm of discharge height. Swing angle is 360 degrees, minimum turning radius is 1290 mm, climbing gradient is 30 degrees and travel is 3 km/h. The bulldozer blade digs 190 mm and lifts 260 mm. A Lai Dong 380 diesel rated 19 kW drives the machine, and the body is 2950 mm long by 1100 mm wide on 180 mm tracks. Colour, logo, engine and attachments can be customised.
LHD-17J Mini Excavator
LUHONGDA
| Availability: | |
|---|---|
LHD-17J is a 1.7 ton mini excavator for pipe laying and utility work along roads, verges and service corridors. Digging depth is 1900 mm, digging radius 2450 mm, and a 19 kW Lai Dong 380 diesel drives the pump through a full run of pipe bedding and backfill.
Pipe work is not only digging: the machine lifts a section, holds it while the bed is trimmed, then backfills. The Lai Dong 380 delivers 19 kW, which keeps the boom steady through a lift rather than bleeding off at the moment the section clears the trench.
At 1900 mm of digging depth with 1800 mm of discharge height, the machine digs a water or cable trench and loads the spoil clear of the run, so the bedding layer stays clean.
Utility corridors are narrow and often live with traffic. A 1100 mm wide body with a 1290 mm turning radius works a verge strip without closing a second lane, and the blade trims back the spoil line as the run advances.
Water and sewer pipe trenching
Cable and duct laying
Road verge and shoulder utility work
Pipe bedding and backfill
Service connections to new build
Item | Specification |
|---|---|
Model | LHD-17J |
Track Width | 180 MM |
Bucket Volume | 0.03 M3 |
Ground Clearance | 370 MM |
Machine Weight | 1700 KG |
Max Digging Height | 2750 MM |
Max Discharge Height | 1800 MM |
Max Digging Depth | 1900 MM |
Max Digging Radius | 2450 MM |
Mini Turning Radius | 1290 MM |
Swing Angle | 360° |
Climbing Gradient | 30° |
Walking Speed | 3 KM/H |
Bulldozer Max Depth | 190 MM |
Bulldozer Raising Height | 260 MM |
Product Size | 2950*1100*2200 MM |
Engine | Lai Dong 380 |
Rated Power | 19 KW |
Utility work runs to a programme, and a machine that loses power mid lift costs the crew a pipe and a morning. The Lai Dong 380 gives 19 kW for steady lifting, the 1100 mm body keeps the machine inside a verge closure, and attachments, paint and manual language are agreed at quotation. The series is CE certified.
Is it powerful enough for pipe lifting? The Lai Dong 380 is rated 19 kW, which holds the boom steady while a section is bedded.
How deep is the trench capacity? 1900 mm of digging depth with 2450 mm of digging radius and 1800 mm of discharge height.
Will it work inside a lane closure? The body is 1100 mm wide with a 1290 mm turning radius, so it works a verge strip inside one closure.
Can we specify attachments and livery? Attachments, paint, decals and manual language are agreed at quotation. Send the market and the volume.
Send the pipe diameter, the trench length and the destination port, and we will confirm configuration and packing.