LHD-17 is a 1.7 ton mini excavator for foundation work and drainage trenches. Track width is 180 mm and the body measures 2950*1100*2200 mm with 370 mm of ground clearance. Bucket volume is 0.03 m3, maximum digging depth is 2000 mm and digging radius is 2450 mm, with 2750 mm of digging height and 1800 mm of discharge height. Swing angle is 360 degrees, minimum turning radius is 1190 mm, climbing gradient is 30 degrees and travel is 0-3 km/h. The bulldozer blade digs 190 mm and lifts 260 mm. Engine options are a Changchai 390 or a Kubota D722 at 10.2 kW, and the machine is 2950 mm long on a 3.5 t trailer. Colour, logo, engine and attachments can be customised.
LHD-17 Mini Excavator
LUHONGDA
| Availability: | |
|---|---|
LHD-17 is a 1.7 ton mini excavator for foundation trenches and drainage runs, where 1 ton of machine cannot reach the depth and a 3 ton unit cannot get to the plot. Digging depth is 2000 mm, digging radius 2450 mm, and the 0.03 m3 bucket works a footing trench from one position.
A strip footing or a drainage run needs depth before width. At 2000 mm of digging depth and 2750 mm of digging height, the boom reaches the bottom of a domestic footing without the tracks moving off the line.
On a finished plot the machine has to dig without tracking over a garden or a drive. A 1190 mm minimum turning radius lets the LHD-17 swing inside the working area, and the 1100 mm wide body passes a side access.
A buyer either wants the lower cost of a Changchai 390 or the familiar service of a Kubota D722, both rated 10.2 kW. The frame and hydraulic layout are the same, so the spare parts list does not change with the engine.
Strip footing and foundation trenches
Drainage and soakaway runs
Cable and water service trenches
Extension and garage footings
Small site cut and level work
Item | Specification |
|---|---|
Model | LHD-17 |
Track Width | 180 MM |
Bucket Volume | 0.03 M3 |
Ground Clearance | 370 MM |
Machine Weight | 1700 KG |
Max Digging Height | 2750 MM |
Max Discharge Height | 1800 MM |
Max Digging Depth | 2000 MM |
Max Digging Radius | 2450 MM |
Mini Turning Radius | 1190 MM |
Swing Angle | 360° |
Climbing Gradient | 30° |
Walking Speed | 0-3 KM/H |
Bulldozer Max Depth | 190 MM |
Bulldozer Raising Height | 260 MM |
Product Size | 2950*1100*2200 MM |
Engine | Changchai 390 / Kubota D722 |
Rated Power | 10.2 KW |
Foundation work is priced by the trench, so the machine has to reach depth quickly and leave the plot as it found it. The 1100 mm body works inside a domestic access, and the blade backfills what the bucket dug, and paint, decals and manual language are set at quotation. The series is CE certified.
How deep will it dig a footing trench? 2000 mm of digging depth with 2450 mm of digging radius, working from one position.
Which engine should we choose? Changchai 390 or Kubota D722, both 10.2 kW. The Kubota has the wider service network; the Changchai is the lower cost option.
Will it damage a finished garden? The minimum turning radius is 1190 mm and the body is 1100 mm wide, so it works inside a plot without a wide track.
Can it run a breaker or auger? Attachments, paint, decals and manual language are agreed at quotation. Send the market and the volume.
Send the trench length, the required depth and the destination port, and we will confirm configuration and packing.