LHD-20 is a 2 ton mini excavator for pond excavation and site cut work. Track width is 230 mm and the body measures 3250*1100*2300 mm with 370 mm of ground clearance. Bucket volume is 0.05 m3, maximum digging depth is 2200 mm and digging radius is 3360 mm, with 3300 mm of digging height and 2300 mm of discharge height. Swing angle is 360 degrees, minimum turning radius is 830 mm, climbing gradient is 30 degrees and travel is 0-3 km/h. The bulldozer blade digs 190 mm and lifts 260 mm. A Kubota D722-EF diesel rated 10.2 kW at 2000 rpm drives the machine, and the body is 3250 mm long by 1100 mm wide. Colour, logo, engine and attachments can be customised.
LHD-20 Mini Excavator
LUHONGDA
| Availability: | |
|---|---|
LHD-20 is a 2 ton mini excavator for pond excavation and site cut work, where the reach has to be long and the machine still has to turn inside a garden. Digging depth is 2200 mm, digging radius 3360 mm, and the 0.05 m3 bucket carries a full load at the pond edge.
A pond or a terrace cut is usually surrounded by something the owner wants kept. A minimum turning radius of 830 mm lets the LHD-20 swing on the spot, so the tracks stay on the working area and the lawn beside it survives.
At 3360 mm of digging radius the machine cuts a pond edge or a bank batter without repositioning on soft ground, and 3300 mm of digging height loads a skip from a low level.
The bucket holds 0.05 m3 on a body still 1100 mm wide, so the machine moves the same volume in fewer cycles than a 0.03 m3 unit, and 230 mm tracks keep the ground pressure down on wet margins.
Pond, soakaway and water feature excavation
Terrace and garden level cuts
Bank battering and edge trimming
Driveway and patio sub-base cut
Small site strip and clearance
Item | Specification |
|---|---|
Model | LHD-20 |
Track Width | 230 MM |
Bucket Volume | 0.05 M3 |
Ground Clearance | 370 MM |
Machine Weight | 2000 KG |
Max Digging Height | 3300 MM |
Max Discharge Height | 2300 MM |
Max Digging Depth | 2200 MM |
Max Digging Radius | 3360 MM |
Mini Turning Radius | 830 MM |
Swing Angle | 360° |
Climbing Gradient | 30° |
Walking Speed | 0-3 KM/H |
Bulldozer Max Depth | 190 MM |
Bulldozer Raising Height | 260 MM |
Product Size | 3250*1100*2300 MM |
Engine | Kubota D722-EF |
Rated Power | 10.2 KW at 2000 RPM |
Pond and garden work is judged on the finish around the hole, not only on the hole. The 830 mm turning radius keeps the machine off finished ground, the 230 mm tracks spread load on wet margins, and the Kubota D722-EF is a known industrial diesel. Paint, decals, attachments and manual language are agreed at quotation, and the series is CE certified.
Will it turn on a lawn without a wide track? The minimum turning radius is 830 mm, so the machine swings on the working area rather than tracking over finished ground.
How big a pond can it cut? Digging radius is 3360 mm and depth 2200 mm, with a 0.05 m3 bucket, so a garden pond is cut from a few positions.
What engine is fitted? A Kubota D722-EF rated 10.2 kW at 2000 rpm.
Can attachments be added later? Attachments, paint, decals and manual language are agreed at quotation. Send the market and the volume.
Send the pond size, the ground conditions and the destination port, and we will confirm configuration and packing.