LHD-12 is a 1 ton mini excavator for landscaping and utility trench work. Track width is 180 mm and the body measures 2870*1000*2030 mm, with 380 mm of ground clearance. Bucket volume is 0.03 m3, maximum digging depth is 1700 mm and digging radius is 3030 mm, with 2580 mm of digging height and 1745 mm of discharge height. Swing angle is 360 degrees, minimum turning radius is 1290 mm, climbing gradient is 30 degrees and travel is 0-3 km/h. The bulldozer blade digs 170 mm and lifts 240 mm. A KOOP 192FC diesel rated 7.6 kW, listed as EURO-5, drives the machine, and the body is 2870 mm long, so it loads onto a small trailer. Colour, logo, engine and attachments can be customised.
LHD-12 Mini Excavator
LUHONGDA
| Availability: | |
|---|---|
LHD-12 is a 1 ton mini excavator for landscaping and utility trenches, sized where a garden machine runs out of depth and a 2 ton unit cannot turn. Digging depth is 1700 mm, digging radius 3030 mm, and the 0.03 m3 bucket works a service trench from one position.
A utility trench has to reach 1700 mm and follow the line without the tracks leaving the strip. With 3030 mm of digging radius the boom reaches along the run, and the 360 degree swing lets the operator load spoil either side.
Landscape boundaries, kerb lines and fence lines leave little working width. At 1000 mm wide with a 1290 mm minimum turning radius, the machine works inside a boundary without taking a second strip of ground.
Utility work on public land increasingly asks for a listed engine. The KOOP 192FC is a 7.6 kW diesel listed as EURO-5, and 380 mm of ground clearance keeps the machine clear of kerbs and spoil.
Water, gas and cable service trenches
Landscape drainage and irrigation runs
Footing and foundation trenches on extensions
Kerb side and verge excavation
Pond, soakaway and small earthworks
Item | Specification |
|---|---|
Model | LHD-12 |
Track Width | 180 MM |
Bucket Volume | 0.03 M3 |
Ground Clearance | 380 MM |
Machine Weight | 1000 KG |
Max Digging Height | 2580 MM |
Max Discharge Height | 1745 MM |
Max Digging Depth | 1700 MM |
Max Digging Radius | 3030 MM |
Mini Turning Radius | 1290 MM |
Swing Angle | 360° |
Climbing Gradient | 30° |
Walking Speed | 0-3 KM/H |
Bulldozer Max Depth | 170 MM |
Bulldozer Raising Height | 240 MM |
Product Size | 2870*1000*2030 MM |
Engine | KOOP 192FC (EURO-5) |
Rated Power | 7.6 KW |
Utility contractors specify by depth, width and engine listing, because the machine has to work inside a permit condition. The 192FC diesel is listed as EURO-5, the 1000 mm body works within a boundary strip, and bucket, quick coupler and attachments are supplied against the same order. Manual language and decals are set at quotation, and the series is CE certified.
How deep can it trench? 1700 mm of digging depth with a 3030 mm digging radius, working from one position along the run.
Will it fit a footpath closure? The body is 1000 mm wide with a 1290 mm minimum turning radius, so it works inside a footpath or verge closure.
What engine and emission listing? A KOOP 192FC diesel rated 7.6 kW, listed as EURO-5.
Can it run a breaker or auger? Attachments and a quick coupler are agreed at quotation, together with paint, decals and manual language.
Send the trench length, the required depth and the destination port, and we will confirm configuration and packing.