LHD-YL5000 is a 1450 mm single drum road roller for large fill, site levelling and base course work. A 5000 kg frame carries a 1000 mm drum, the vibration force is 100 kN, and drive is CVT with a Yunnei 490 diesel rated 36.8 kW and listed as National III, so the machine works at a weight site roads can take. The working width is 1450 mm across the drum. The drum covers a levelling strip that a 1350 mm machine needs two overlapping runs to finish, which is where a platform starts to read uneven. The package measures 4450*1680*2750 mm, which keeps the machine inside site roads and between kerbs without an escort. Colour, logo, engine and fittings can be customised.
LHD-YL5000 Road Roller
LUHONGDA
| Availability: | |
|---|---|
LHD-YL5000 is a 1450 mm single drum roller for large fill and site levelling. A 5000 kg frame carries a 1000 mm drum with 100 kN of vibration force, and drive is CVT on a 36.8 kW Yunnei 490 diesel. It sits in the band between the 4 ton machines and the 6 ton units, which is where most platform and base course contracts are priced.
At 1450 mm the drum covers a platform strip that a 1350 mm machine finishes in two overlapping runs, and the seam between those runs is where a finished platform reads uneven under a straight edge.
100 kN at 5000 kg is the working point for platform fill and base course. Going heavier stops the machine fitting between kerbs, site roads and service trenches, which is where a fill contract actually lives.
A hydrostatic failure needs a pump specialist, and on a remote site that is a week. CVT drive uses a transmission most yards can open, and the Yunnei 490 is a four cylinder unit that diesel workshops already know.
Large fill and platform levelling
Base course and sub-base compaction
Site roads and haul road sub-base
Industrial plot and yard preparation
Embankment and bund compaction
Item | Specification |
|---|---|
Model | LHD-YL5000 |
Drum Width | 1450 MM |
Drum Diameter | 1000 MM |
Package Size | 4450*1680*2750 MM |
Working Weight | 5000 KG |
Vibration Force | 100 KN |
Drive Form | CVT |
Engine Model | Yunnei 490 (National III) |
Engine Type | Diesel |
Engine Power | 36.8 KW |
Buyers who take a 5 ton roller usually keep it for eight to ten years, so the engine and the parts list matter more than the paint. The 490 is a supported four cylinder diesel, the manual and parts list are issued in the buyer's language, and the CVT layout uses standard components rather than a single source transmission. The series is CE certified.
Why 5 ton instead of 6 ton? 5000 kg with 1450 mm fits site roads and platform edges where a 6 ton machine is too heavy or too wide, and 100 kN is enough for platform fill and base course.
Does it come with a water tank? No. This is a fill and base course machine, and the brochure lists no spray system for it.
Can it be built for our market? Paint, label, manual language and fittings are agreed at quotation. Send the market and the volume.
Send the fill volume, the platform width and the destination port, and we will confirm configuration and packing.