LHD-YL700 is a 700 mm walk behind road roller for asphalt repair and footpath reinstatement. The drum is 700 mm wide and 560 mm in diameter, carries 500 kg of working weight and 65 N/cm of static line load, which covers both asphalt and granular base. A 20 kN vibration force at 70 Hz runs through hydraulic station drive and automatic clutch, and a 25 L water tank covers a long footpath run. The same frame takes an air cooled Changchai or Changfa 178F diesel or a Honda GX270 petrol engine, both 4 kW. Travel is 0-4 km/h at 30% gradeability, and the machine is 1300 mm long, 850 mm wide and 1600 mm high. Colour, logo, engine and fittings can be customised.
LHD-YL700 Road Roller
LUHONGDA
| Availability: | |
|---|---|
LHD-YL700 is a 700 mm hand guided roller for footpath reinstatement and repair work that is too wide for a 600 mm drum and too narrow for a ride-on machine. The 560 mm drum carries 500 kg and 65 N/cm of line load, so the layer is worked once at full width. A 25 L tank covers the spray, and the frame accepts either a diesel or a petrol engine.
A 600 mm drum on a 700 mm path means overlapping runs and a joint down the middle. At 700 mm the strip is covered in one pass, and 65 N/cm is enough to work the granular base under the asphalt as well as the surface.
Footpath crews work in short runs between access points, and a small tank means the spray is refilled more often than the path is rolled. At 25 L the drum stays wet from one end of the path to the other.
Some markets fuel petrol and service it anywhere; others will only run diesel. The same roller is built with a Changchai or Changfa 178F diesel or a Honda GX270 petrol, both 4 kW, so the dealer orders the version his customers already maintain.
Footpath and pavement reinstatement
Asphalt repair around service covers
Driveway and entrance patching
Small yard and forecourt levelling
Base course under footpaths and cycleways
Item | Specification |
|---|---|
Model | LHD-YL700 |
Drum Width | 700 MM |
Drum Diameter | 560 MM |
Working Weight | 500 KG |
Gradeability | 30% |
Water Tank Volume | 25 L |
Product Size | 1300*850*1600 MM |
Walking Speed | 0-4 KM/H |
Static Line Load | 65 N/cm |
Nominal Amplitude | 0.5 MM |
Vibration Frequency | 70 Hz |
Vibration Force | 20 KN |
Drive Form | Hydraulic Station |
Vibration Form | Automatic Clutching / Magnetic Clutching |
Engine Model | Changchai, Changfa 178F / Honda GX270 |
Engine Type | Diesel, Air-cooled 4-stroke / Gasoline |
Engine Power | 4 KW |
Fuel Consumption | ≤280 g/kw.h |
The footpath end of the range is ordered alongside the 600 mm and 800 mm units, so drums, handles and spray parts are common across the three. Paint and label follow the buyer, manual language is set with the order, and the series is CE certified.
Is 700 mm better than 600 mm for footpaths? On paths of 700 mm and above, yes: one pass covers the width, so there is no joint down the middle of the path.
Will the same machine work on granular base? At 65 N/cm and 500 kg it works the base under the asphalt, not only the surface.
Diesel or petrol? A Changchai or Changfa 178F diesel, or a Honda GX270 petrol, both 4 kW. Order the fuel your customers already service.
Send the footpath length, the surface type and the destination port, and we will confirm configuration and packing.