LHD-YL8000 is a 1850 mm single drum road roller for heavy fill, long base runs and wide platform strips. An 8000 kg frame with a 1200 mm drum produces 120 kN at 70 Hz, and the wide shell puts that force across a full lane in one run. A 76 kW supercharged Yunnei 4102 diesel, listed as National III, pulls the machine through deep fill with a 90 L fuel tank behind it. Drive is CVT with a disc air assist oil brake and 24V electric start, the turning radius is 5000 mm, and walking speed runs 2-12 km/h at 30% gradeability. The drum shell measures 1200 mm, and the machine is 4550*2090*2750 mm overall. Colour, logo, engine and fittings can be customised.
LHD-YL8000 Road Roller
LUHONGDA
| Availability: | |
|---|---|
LHD-YL8000 is the widest single drum unit in this range: 1850 mm of drum, 8000 kg of working weight, and a supercharged diesel behind it. It is built for heavy fill and long base runs where a narrower machine would put two passes into every strip. The drum turns at 70 Hz and delivers 120 kN, and drive is CVT with disc air assist oil braking.
Whatever the drum misses becomes a second overlapping pass with a joint in the base of it. At 1850 mm the strip goes down in one run, and the joint that usually shows up under the asphalt never forms.
Deep fill is rolled pass after pass, and a small engine loses its edge by mid afternoon. A supercharged 76 kW diesel holds the working speed, and the 90 L tank keeps the machine on the fill instead of on the fuel point.
On a wet haul road or a platform edge, an 8 ton roller has to stop without relying on transmission drag. Disc air assist oil braking holds it on the grade.
Heavy fill and embankment compaction
Long road base and sub-base runs
Wide platform and port area fill
Haul road construction and maintenance
Airport apron and industrial hardstanding base
Item | Specification |
|---|---|
Model | LHD-YL8000 |
Drum Width | 1850 MM |
Drum Diameter | 1200 MM |
Working Weight | 8000 KG |
Gradeability | 30% |
Walking Speed | 2-12 KM/H |
Vibration Frequency | 70 Hz |
Vibration Force | 120 KN |
Turning Radius | 5000 MM |
Braking System | Disc air assist oil brake |
Start Form | Electric Start |
Drive Form | CVT |
Vibration Form | Hydraulic Vibration |
Product Size | 4550*2090*2750 MM |
Engine Model | Yunnei 4102 Supercharged (National III) |
Engine Power | 76 KW |
Fuel Tank Capacity | 90 L |
Battery Voltage | 24 V |
This is the machine a fleet sends when the site is too wide for its 6 ton roller and the contract will not wait for two passes on every strip. Drum shell, paint, label and manual language are set at quotation, the series is CE certified, and the diesel is a common four cylinder unit.
Why 1850 mm and not 1650 mm? On wide fill and long base runs the extra width removes an overlapping pass on every strip, which is where the joint in the base comes from.
Is 76 kW enough for an 8 ton machine? The engine is supercharged, so it holds working speed in deep fill rather than dropping back as the layer gets heavier.
What brake and drive does it use? CVT drive with a disc air assist oil brake, 24V electric start and hydraulic vibration.
Send the site width, fill depth and destination port, and we will confirm configuration and packing.