LHD-YLS600 is a 600 mm walk behind double drum road roller for asphalt patch work and the seam between passes. Two 600 mm by 425 mm drums carry 560 kg of working weight and 45 to 50 N/cm of static line load, so the mat is pressed twice in a single run. A 20 kN vibration force at 70 Hz comes through hydraulic station drive and automatic clutch, and a 13 L tank feeds both drums. Engine options are a water cooled Changchai 180 at 5.67 kW or an air cooled Honda or Changfa 178F at 4 kW. Both drums are 600 mm wide, travel runs 0-4 km/h at 30% gradeability, and the package measures 1415*865*1290 mm. Colour, logo, engine and fittings can be customised.
LHD-YLS600 Road Roller
LUHONGDA
| Availability: | |
|---|---|
LHD-YLS600 is a hand guided twin drum roller for asphalt patches and the seam left between passes. Two 600 mm drums share 560 kg of working weight, so the strip is compacted a second time by the rear drum before the mat cools. A 13 L tank serves both drums, and the 20 kN drum runs on hydraulic station drive.
The joint between two paving passes is the first place a road fails, because the edge cools before it is rolled again. Here the rear drum rolls the strip the front drum has just compacted, closing the seam while the asphalt is still workable.
A single drum machine leaves the operator walking back over the same strip to finish the edge. With a drum at each end, the machine returns the pass on its way out, and the strip is done in one movement.
Dry drums pick up asphalt and tear the surface. The 13 L tank splits its spray across both drums, so the rear drum is as wet as the front one through a full patch.
Asphalt patch and reinstatement work
Seam rolling between paving passes
Driveway and footpath resurfacing
Car park bay repairs
Small area asphalt overlays
Item | Specification |
|---|---|
Model | LHD-YLS600 |
Drum Width | 600 MM * 2 |
Drum Diameter | 425 MM * 2 |
Working Weight | 560 KG |
Gradeability | 30% |
Water Tank Volume | 13 L |
Package Size | 1415*865*1290 MM |
Walking Speed | 0-4 KM/H |
Static Line Load | 45N/50N/cm |
Nominal Amplitude | 0.5 MM |
Vibration Frequency | 70 Hz |
Vibration Force | 20 KN |
Drive Form | Hydraulic Station |
Vibration Form | Automatic Clutch |
Engine Model | Changchai 180 / Honda, Changfa 178F |
Engine Type | Water Cooled / Air-cooled 4-stroke |
Engine Power | 5.67 KW / 4 KW |
Fuel Consumption | ≤280 g/kw.h |
Dealers who sell this roller usually put their own name on it, so the paint code, decal placement and manual language are agreed before production rather than after delivery. Drum shells and water systems are shared with the single drum model, which keeps a spare parts list short. The series is CE certified, and a sample unit can be arranged before a first order.
Is a twin drum worth it over a single drum? On patch and seam work yes: the rear drum closes the joint in the same pass instead of a second walk over the strip.
Can we put our own brand on it? Decals, paint colour and manual language are set at quotation, and a sample unit can be prepared before the first order.
Which engine do you recommend? A water cooled Changchai 180 at 5.67 kW for continuous patch work, or an air cooled 178F at 4 kW where servicing is simpler.
Send the patch area, the asphalt type and the destination port, and we will confirm configuration and packing.