LHD-YL800Q is a 1.5 ton ride on tandem roller for continuous asphalt laying on streets and access roads. Two 800 mm drums, 530 mm in diameter, carry 1500 kg of working weight and 60 to 75 N/cm of static line load. Vibration is produced by a Danfoss hydraulic motor at 30 kN and 70 Hz with 0.5 mm amplitude, drive is hydrostatic, and a 55 L tank feeds both drums. The air cooled Changchai 192F diesel delivers 8.2 kW at ≤300 g/kw.h. Travel runs 0-6 km/h at 30% gradeability, the frame is 2100 mm long, and the spray bar covers both drums through a whole street contract and the tie ins at each end. Colour, logo, engine and fittings can be customised.
LHD-YL800Q Road Roller
LUHONGDA
| Availability: | |
|---|---|
LHD-YL800Q is a 1.5 ton ride on tandem roller for laying asphalt all day rather than for patching it. Two 800 mm drums carry 1500 kg, vibration comes from a Danfoss hydraulic motor at 30 kN, and the 55 L tank keeps both drums wet from the first load to the last.
A clutch driven drum loses force once the machine has worked hot for hours, and the last hundred metres of a street never close the way the first did. The Danfoss hydraulic motor holds 30 kN through the shift, so the finish at the end of the day matches the start.
Every extra pass costs fuel, wages and a later opening. At 1500 kg on two 530 mm drums the lift closes in fewer passes than a 1200 kg tandem, and the operator finishes the street with time left for the tie in.
A radiator needs clean water and attention, and on a remote road job neither is guaranteed. The air cooled 192F at 8.2 kW removes that service point, and the 55 L tank is kept for the drums alone.
Street and access road asphalt laying
Car park and forecourt paving
Trunk road tie ins and reinstatement
Industrial estate roads
Base and wearing course on municipal contracts
Item | Specification |
|---|---|
Model | LHD-YL800Q |
Drum Width | 800 MM * 2 |
Drum Diameter | 530 MM * 2 |
Working Weight | 1500 KG |
Gradeability | 30% |
Water Tank Volume | 55 L |
Product Size | 2100*940*1500 MM |
Walking Speed | 0-6 KM/H |
Static Line Load | 60N/75N/cm |
Nominal Amplitude | 0.5 MM |
Vibration Frequency | 70 Hz |
Vibration Force | 30 KN |
Drive Form | Hydrostatic Transmission |
Vibration Form | Hydraulic Vibration, Danfoss Motor |
Engine Model | Changchai 192F |
Engine Type | Diesel, Air-Cooled 4-stroke |
Engine Power | 8.2 KW |
Fuel Consumption | ≤300 g/kw.h |
This model is usually sold under a dealer's own brand, with the machine, the decals and the manual delivered as one package rather than as a bare roller. Colour and decal artwork are confirmed before production, manual language follows the market, and a pre production sample can be arranged for a first order. The series is CE certified.
Why hydraulic vibration instead of a clutch? A Danfoss motor keeps 30 kN on the drum through a hot shift, where a clutch drive can lose force as the machine works.
Is 1500 kg enough for a street lift? Two 530 mm drums at 60 to 75 N/cm close a normal street lift in fewer passes than a 1200 kg tandem.
Can it be delivered in our livery? Colour, decals and manual language are agreed before production. Send the market and the volume.
Send the street length, the asphalt specification and the destination port, and we will confirm configuration and packing.