English

Products

Home » Products » Road Roller » LHD-YL800 635mm Walk Behind Double Drum Roller for Driveway and Yard Paving

Product Category

Contact Us

LHD-YL800 635mm Walk Behind Double Drum Roller for Driveway and Yard Paving

LHD-YL800 is a 635 mm walk behind double drum road roller for driveway, yard and approach paving. Two 635 mm drums, 350 mm in diameter, carry 800 kg of working weight and 75 N/cm of static line load, which is the weight a residential driveway layer needs. A 20 kN vibration force at 70 Hz is engaged by an electromagnetic clutch and drive is fully hydraulic. A 26 L tank feeds both drums, and a 20 L hydraulic oil tank serves the transmission. The air cooled Honda or Changfa 178F diesel is available at 13 HP or 9 HP. Travel is 0-4 km/h at 30% gradeability, and the package measures 1510x870x1920 mm. Colour, logo, engine and fittings can be customised.

  • LHD-YL800 Road Roller

  • LUHONGDA

Availability:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

Product Overview

LHD-YL800 is a 635 mm hand guided twin drum roller built for driveways, yards and approaches where the paving has to look finished at the door. Two drums carry 800 kg with 75 N/cm of line load, and the fully hydraulic drive starts smoothly against a wall or a gate post. A 26 L tank serves both drums through the spray bar.

Made for the Residential Finish

A Driveway Shows Every Mark

Driveways and entrance aprons are looked at every day, so a roller that stops and starts with a snatch leaves a scar the owner will see. Here the drive is fully hydraulic, and vibration engages through an electromagnetic clutch, so travel and drum can be worked separately at the edge.

Enough Weight for the Layer

A light twin drum bounces over a driveway lift and leaves it porous. At 800 kg with 75 N/cm the layer closes, and the twin drums repeat the pass before the mat cools.

Water and Oil in One Frame

The 26 L spray tank and the 20 L hydraulic oil tank are sized for a full driveway and its approach, so neither is topped up in the middle of a pour.

Applications

  • Residential driveway and entrance paving

  • Yard, patio and courtyard surfaces

  • Approach aprons and garage forecourts

  • Footpath to driveway transitions

  • Small parking areas and hardstandings

Technical Specifications

Item

Specification

Model

LHD-YL800

Drum Width

635 MM * 2

Drum Diameter

350 MM

Working Weight

800 KG

Gradeability

30%

Water Tank Volume

26 L

Package Size

1510x870x1920 MM

Walking Speed

0-4 KM/H

Static Line Load

75 N/cm

Nominal Amplitude

0.5 MM

Vibration Frequency

70 Hz

Vibration Force

20 KN

Drive Mode

Fully Hydraulic Transmission

Vibration Control

Electromagnetic Clutch

Engine Model

HONDA / Changfa 178F

Engine Type

Diesel, Air-cooled 4-stroke

Engine Power

13 HP / 9 HP

Hydraulic Oil Tank

20 L

Why Choose Luhongda

Paving contractors buy this unit for the last hundred metres of a job, after the tandem has left, so it is built to be light enough for one man and finished well enough for a homeowner to look at. Common handles, drums and spray parts link it to the wider hand guided range, paint and label are agreed at quotation, and the series is CE certified.

Buyer Questions

Will it mark a new driveway at the edges? Travel is fully hydraulic and vibration is on an electromagnetic clutch, so the drum can be stopped at the edge without stopping the machine.

13 HP or 9 HP? 13 HP for continuous paving and thicker lifts, 9 HP for lighter work and lower fuel use, on the same air cooled 178F engine.

Is 800 kg enough for a domestic driveway? With 75 N/cm of line load and twin drums it closes a normal driveway lift; the twin drums repeat the pass immediately.

Request a Quote

Send the driveway area, the layer type and the destination port, and we will confirm configuration and packing.

Previous: 
Next: 
LHD Machinery is a professional manufacturer and exporter of construction machinery, committed to providing reliable, efficient and cost-effective equipment solutions for global customers.

PRODUCTS

QUICK LINKS

JOIN GLOBAL INSIGHTS

Get latest industry whitepapers and tech updates.
Leave a Message
Contact Us
Copyright © 2026 Shandong Luhongda Machinery Co., Ltd. All Rights Reserved.
Privacy Policy            Sitemap