LHD-YL800S is an 800 mm ride on tandem roller for residential street resurfacing and estate reinstatement, built to run one street end to end without a water stop. Two 800 mm drums, 530 mm in diameter, carry 1200 kg of working weight and 60 to 75 N/cm of static line load. A 30 kN vibration force at 70 Hz comes through electromagnetic clutch vibration on hydrostatic transmission, and a 65 L water tank covers a full street. Engine options are a water cooled Changchai L12 at 8.8 kW or an air cooled Changfa 186F at 6.6 kW, both at ≤280 g/kw.h. Travel runs 0-6 km/h at 30% gradeability, and the machine measures 2100*940*1500 mm. Colour, logo, engine and fittings can be customised.
LHD-YL800S Road Roller
LUHONGDA
| Availability: | |
|---|---|
LHD-YL800S is an 800 mm tandem roller with a ride on platform, sized for residential streets and estate reinstatement where a hand guided machine cannot keep up with the paving gang, and built to run a full street without stopping for water. Two 530 mm drums carry 1200 kg on a 2100 mm frame, and the 65 L tank covers a street without a refill.
On a residential resurfacing job the paver sets the pace, and a walking operator falls behind by mid morning. A ride on platform at 0-6 km/h keeps the roller with the gang, so the mat is closed before the next truck arrives.
A residential street has a joint at every driveway and side road. The rear drum rolls the strip the front drum has just closed, so each joint is worked twice in one pass.
Street work runs from one end to the other without a natural stop. At 65 L the tank lasts the length of the job, and both engines run at ≤280 g/kw.h.
Residential street resurfacing
Utility reinstatement in housing estates
Estate roads and cul de sacs
Driveway apron and crossover paving
Car park and forecourt surfaces
Item | Specification |
|---|---|
Model | LHD-YL800S |
Drum Width | 800 MM * 2 |
Drum Diameter | 530 MM * 2 |
Working Weight | 1200 KG |
Gradeability | 30% |
Water Tank Volume | 65 L |
Product Size | 2100*940*1500 MM |
Walking Speed | 0-6 KM/H |
Static Line Load | 60N/75N/cm |
Nominal Amplitude | 0.5 MM |
Vibration Frequency | 70 Hz |
Vibration Force | 30 KN |
Drive Form | Hydrostatic Transmission |
Vibration Form | Electromagnetic Clutch |
Engine Model | Changchai L12 / Changfa 186F |
Engine Type | Diesel, Water Cooled / Air-Cooled 4-stroke |
Engine Power | 8.8 KW / 6.6 KW |
Fuel Consumption | ≤280 g/kw.h |
Small paving contractors want this roller in their own livery, with the decal on the engine cover and the manual in their language, because the machine works in front of their customers all day. Paint, decals and manual language are set at quotation, an operator and maintenance manual follow the machine, and the series is CE certified.
Can it keep up with a paver gang? At 0-6 km/h on a ride on platform, the roller stays with the gang rather than trailing behind it.
Which engine for a hot climate? The air cooled Changfa 186F at 6.6 kW avoids coolant service; the water cooled L12 at 8.8 kW suits continuous work where service is available.
Does it handle driveways and crossovers? Yes, the drums are 800 mm wide and the machine turns inside a residential street width.
Can the machine carry our livery? Paint, decals and manual language are agreed at quotation. Send the market and the volume.
Send the street length, the layer type and the destination port, and we will confirm configuration and packing.